Toll-free 800-569-6037jpaustinorders@jpaustin.com
Family owned & operated since 1962 · Beaver Falls, PA
J.P. Austin Associates Inc.
Concrete additives

Cold Weather Masonry Accelerators

Liquid or powder additives that accelerate the setting rate of mortar and Portland cement, increase strength and enhance workability, so cold weather never delays your masonry work.

Troweling cement mortar

Austin Winter Add-Mix (WAM)

Formulated to accelerate the setting rate of mortar and Portland cement, increase its strength and enhance its workability. It may be used in mortar to lay brick, block and glass block. Available as a liquid or a powder.

Recommended for cool and cold weather to minimize freezing of mortar and concrete mixes; use should be limited to temperatures between 20°F and 45°F. Adds strength and improves workability below 70°F. Has no effect on straight lime mortars and should not be used with oxychloride stuccos.

  • Accelerates setting time and increases strength
  • No efflorescence when added to brick mortar
  • Improves workability of mortar and Portland cement
  • Meets the requirements of ASTM C-494 Type C
  • Eliminates cold weather delays

Dosage chart — add to warm water gauging

25°F1 gallon to 15 gallons of water
20°F1 gallon to 10 gallons of water
15°F1 gallon to 7 gallons of water

Base the mix on the expected temperatures for the 24 hours following job completion. Add 1 quart additional per bag of lime in the mix. Do not add extra sand.

Packaging

Powder carton (30 × 1 lb bags)40 cartons per pallet 1 gallon rounds120 per pallet 5 gallon rounds48 per pallet 55 gallon drum4 per pallet 275 gallon tote1 per pallet
WAM Literature PDF ↓ Winter Add-Mix (WAM) Dosage Chart PDF ↓

ANCA — Austin Non-Chloride Accelerant

A liquid formulated to accelerate the setting rate of mortar and Portland cement, increase its strength and enhance its workability. ANCA contains no calcium chloride or other chloride additives. It may be used in mortar to lay brick, block and glass block.

Recommended for cool and cold weather to minimize freezing of mortar and concrete mixes; use should be limited to temperatures between 20°F and 45°F. Has no effect on straight lime mortars and should not be used with oxychloride stuccos.

  • Accelerates setting time and increases strength
  • No efflorescence when added to brick mortar
  • Improves workability of mortar and Portland cement
  • Meets the requirements of ASTM C-494 Type E
  • Eliminates cold weather delays

Dosage — add directly to each batch of mortar

Per sack32°F & rising25°F & rising
Portland cement1 quart1½ quarts
Masonry cement1 pint1½ pints
Colored mortars1 pint1½ pints

Typical setting time at 40°F

Type S with ANCA34% faster
Type M with ANCA29% faster
Type N with ANCA28% faster

Liquid: 1 gal rounds (120/pallet) · 5 gal rounds (48/pallet) · 55 gal drum (4/pallet) · 275 gal tote (1/pallet)

ANCA Literature PDF ↓ ANCA Dosage Chart PDF ↓

Safety data sheets

Austin Winter Add-Mix (WAM) SDSPDF ↓ ANCA Non-Chloride Accelerant SDSPDF ↓